Dongyue QT series brick making machines and finished concrete blocks
Product Category · QT Series

Brick Making Machine

A brick making machine — also called a concrete block machine — compacts cement, sand, fly ash or recycled construction waste into building blocks by vibration and hydraulic pressure. Dongyue's 9 QT models cover outputs from 2,880 to 34,560 blocks per shift, for hollow blocks, solid bricks, pavers and curbstones.

9QT models
34,560max blocks / 8h
116 kWmax host power
1994manufacturer since
Buyer's Guide

How to choose the right QT brick making machine

Selecting a brick making machine starts with the block you intend to sell, not the machine you want to buy. A 400×200×200 mm hollow block and a 240×115×53 mm solid brick occupy very different areas of the same pallet, so the pallet size and blocks per mould determine real output far more than the model name suggests. Always compare capacity at a stated block size — Dongyue quotes hollow-block output at 400×200×200 mm.

Next, match the degree of automation to your labour cost and order volume. Fully automatic QT models (QT4-15 and above) run with a three-person crew handling the control cabinet, pallet feeding and finished-block transfer, and accept a colour feeding machine, stacker and automatic pallet feeder. The manual QT4-24 suits smaller investors: lower capital cost, a two-person crew, but no colour feeder and a slower 360–450 blocks per hour.

Third, check the vibration and forming system. Smaller machines use vibration motors or a vibration box; from QT8-15 upward a synchronous gearbox drives the eccentric shaft, and from QT10-15 upward larger cylinders and servo assistance deliver denser, less fragile facing bricks. A static platform on QT6-15 and above keeps vibration even and improves block consistency.

Finally, plan the whole line, not just the host: a three-bin batching plant, JS twin-shaft mixer, 6–10 m belt conveyors, cement silo with screw conveyor, face-material feeder and stacker. Dongyue recommends hemp-fibre pallets for a 5–6 year service life, and supplies spare-part kits (limit switches, chains, rubber vibration pads, contactors). Use the comparison table below to shortlist 2–3 models, then request a line layout and a quotation tailored to your block size.

The Range

6 QT models compared at a glance

Filter by series or application. Tick "Compare" to shortlist models for a side-by-side quote.

Series Application Showing 6 of 9 models · Page 2 →
Fully AutomaticBest seller QT18-15 fully automatic concrete block making machine, 116 kW, 34,560 blocks per shift

QT18-15

Flagship high-capacity line · 18 blocks/mould

Max output
34,560 pcs/8h
Host power
116 kW
Fully Automatic QT12-15 automatic hollow block making machine, 56.2 kW, 1400x900 mm pallet

QT12-15

High output servo-assisted line · 12 blocks/mould

Max output
23,040 pcs/8h
Host power
56.2 kW
Fully Automatic QT10-15 fully automatic block making machine, 51.2 kW, 16,800 blocks per shift

QT10-15

Servo-assisted, high-density facing bricks

Max output
16,800 pcs/8h
Host power
51.2 kW
Fully Automatic QT8-15 automatic concrete block machine with synchronous gearbox, 45 kW

QT8-15

Synchronous gearbox vibration · 8 blocks/mould

Max output
15,360 pcs/8h
Host power
45 kW
Fully Automatic QT6-15 automatic block making machine with static vibration platform, 45 kW

QT6-15

Static + dynamic platform for even compaction

Max output
11,520 pcs/8h
Host power
45 kW
Fully Automatic
QT6A-15Product photo pending upload

QT6A-15

Compact pallet, integrated vibration box

Max output
11,520 pcs/8h
Host power
45 kW
Side by Side

Full 9-model specification comparison

Frozen header, horizontal scroll on mobile, best-in-class values highlighted. Export the table for your investment file.

Highlighted ▲ = highest output / lowest power in the range.
ModelTypeOutput / 8h (pcs)Output / h (pcs)Host powerPallet size (mm)Blocks / mouldVibration
QT18-15Fully auto25,920–34,5603,240–4,320116 kW1400×1350×4018Servo
QT12-15Fully auto17,280–23,0402,160–2,88056.2 kW1400×900×3512Synchronous box
QT10-15Fully auto14,400–16,8001,800–2,40051.2 kW1300×900×28/3010Synchronous box
QT9-15Fully auto12,960–17,2801,620–2,16051.2 kW1400×720×359Synchronous box
QT8-15Fully auto11,520–15,3601,440–1,92045 kW1050×900×25/308Synchronous box
QT6-15Fully auto8,640–11,5201,080–1,44045 kW1150×720×256Vibration box + static
QT6A-15Fully auto8,640–11,5201,080–1,44045 kW900×700×256Integrated vibration box
QT5-15Fully auto7,200–9,600900–1,20037.2 kW1150×580×255Vibration box
QT4-15Fully auto5,760–7,680720–96024 kW880×580×224Vibration box
QT4-24Manual2,880–3,600360–45013.45 kW850×550×254Vibration motor + upper

Data source: Dongyue internal product specification and 2026 Brick Machine Catalog. Output figures are theoretical for 400×200×200 mm hollow blocks (18 mm–25 mm aggregate, standard mix); actual output varies with block size, raw material and operator. QT9-15 shown for range context; request the full catalog for configurations. ▲ marks highest output / most blocks per mould and lowest power. Specifications subject to confirmation in quotation.

Quick Facts

Key numbers and common questions

Concise, citable answers for engineers and procurement teams.

2,880–34,560blocks per 8-hour shift, across the range
13.45–116 kWhost machine power range
15–20 MPatypical forming pressure
70,000demoulding cycles, carburised mould

A brick making machine (block machine) compacts a cementitious mix of cement, sand, fly ash or construction waste into building blocks by vibration and hydraulic pressure. Dongyue QT series machines produce hollow blocks, solid bricks, paving blocks and curbstones by changing the mould, serving investors who need reliable output from 2,880 to 34,560 blocks per eight-hour shift.

The QT18-15 is the flagship: 116 kW host power, a 1400×1350×40 mm pallet and 18 blocks per mould, delivering 3,240–4,320 hollow blocks per hour or 25,920–34,560 blocks per 8-hour shift (400×200×200 mm). It uses a 15-second moulding cycle and 200–220 kN vibration force.

Host machine power ranges from 13.45 kW on the manual QT4-24 to 116 kW on the fully automatic QT18-15. Mid-range fully automatic models such as QT8-15, QT6-15 and QT6A-15 are rated at 45 kW, QT10-15 at 51.2 kW and QT12-15 at 56.2 kW.

Yes. Fully automatic QT models make hollow blocks, solid bricks, interlocking blocks, paving blocks and curbstones by changing the mould. A colour feeding machine is recommended for paving blocks. The QT4-24 is a manual machine limited to hollow and solid blocks and cannot be fitted with a colour feeder.

Pallet sizes scale with output: QT18-15 uses 1400×1350×40 mm, QT12-15 1400×900×35 mm, QT10-15 1300×900×28/30 mm, QT8-15 1050×900×25/30 mm, QT6-15 1150×720×25 mm, QT6A-15 900×700×25 mm, QT5-15 1150×580×25 mm, QT4-15 880×580×22 mm and QT4-24 850×550×25 mm. Dongyue recommends hemp-fibre pallets for a 5–6 year service life.
Talk to an Engineer

Get a quotation and line layout

Tell us your target block size and hourly output — we will shortlist 2–3 models and send the datasheet.

Dongyue Machinery Group Co., Ltd.

NEEQ-listed manufacturer since 1994 · 1,000+ projects in 50+ countries · CE / ISO / SGS certified.

  • Sales Tel / WhatsApp: +86 18660962888
  • Email: manager@donyuegroup.com
  • Yinan County, Linyi, Shandong, China
Verification code
WhatsApp WhatsApp Get a quote